connector new mb-0187-3 december 2014 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 1/10 components product information ? no. of contacts: 5 positions ? contact resistance: 30m ohm max. (initial) ? dielectric withstanding voltage: ac500vrms per minute ? insulation resistance: 1000m ohm (initial) ? rated current: dc1.8a (vbus, gnd) others dc0.5a ? rated voltage: ac30vrms ? durability: 10,000 mating cycles ? operating tem perature: -30 deg. c to +80 deg. c usb 2.0 compatible micro connectors on-board type mid-mount type the dx4 series is a set of connectors com patible with the micro- usb type usb 2.0 for small devices standardized by t he usb implementers forum, inc. ? compatible with universal serial bus micr o-usb cables and connecto rs specification, revision 1.01. ? connector type: usb 2.0 compatible, micro types ? au plating over pd-ni alloy is used fo r mating cycle durability and long product life. ? superior rigidity with high-stre ngth stainless steel shell. ? available in a variety of versions to suit diverse device configurations. ? two-piece shell structure for mid-mount ty pe to prevent contact failure due to flux scattering during reflow. ? available in reinforced type, with reinforc ement plate set in ma ting area to prevent damage from plug caused by misaligned mating. (refer to drawing below) mating area reinforced type *in the above drawing the she ll is transparent for illustra tion purposes to show the reinforcement plate. reinforcement plate of mating area dx4 series rohs compliant features general specifications
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 2/10 micro-usb connector type part number sj drawing specificat ion mounting type mating taper mating area reinforcement plate type b dx4r005jj2 (individual unit) sj110578 jacs- 30162 on-board standard yes no (standard type) dx4r005jj2r1800 (r eel unit) sj110579 dx4r005hj5 (individual unit) sj111770 jacs- 30185 no dx4r005hj5r2000 (reel unit) sj111771 dx4r005jj6 (individual unit) sj112420 jacs- 30251 mid-mount yes dx4r005jj6r1500 (r eel unit) sj112421 dx4r005jj7 (individual unit) sj112422 jacs- 30252 no dx4r005jj7r1500 (r eel unit) sj112423 dx4rn05jj3 (individual unit) sj112800 jacs- 30257 no yes (mating area reinforced type) dx4rn05jj3r2000 (r eel unit) sj112801 dx4r105jjc (individual unit) sj113218 jacs- 30281 on-board reverse yes dx4r105jjcr1800 (r eel unit) sj113219 type ab dx4r205jja (individual unit) sj112925 jacs- 30267 standard no dx4r205jjar1800 (reel unit) sj112926 dx4r305jjb (individual unit) sj112927 jacs- 30268 reverse DX4R305JJBR1800 (reel unit) sj112928 dx4r205jj8 (individual unit) sj112802 jacs- 30258 mid-mount standard yes dx4r205jj8r2000 (r eel unit) sj112803 dx4r205jj9 (individual unit) sj112804 jacs- 30259 no dx4r205jj9r2000 (reel unit) sj112805 note: please place orders in reel units. component material and finish insulator synthetic resin contact copper alloy / contact area: au fl ash plating over pd-ni alloy over ni terminal area: au flash plating over ni shell stainless steel / sn plating over ni *for more information please refer to individual product drawings. board connection type (shell area) j: through-hole type, h: hold-down type reel: 1800 pcs. / reel dx4r005jj2r 1800 series r: receptacle no. of contacts: 5 pos. modification code: #2 plating specification j: contact area: au flash over pd-ni alloy over ni dx4: usb2.0 micro modification code: #1 materials and finishes ordering information
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 3/10 unit: mm standard type (micro-b): dx4r005jj2
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 4/10 unit: mm standard type (micro-b): dx4r005hj5
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 5/10 type without mating area taper (dx4r005jj7) *design is same as dx4r005jj6 except the mating area taper. unit: mm standard type (micro-b): dx4r005jj6
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 6/10 unit: mm mating area reinforced type (micro-b): dx4rn05jj3
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 7/10 g[mm] unit: mm mating area reinforced type (micro-b): dx4r105jjc
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 8/10 unit: mm mating area reinforced type (micro-ab): dx4r205jja
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 9/10 unit: mm mating area reinforced type (micro-ab): dx4r305jjb
mb-0187-3 jae pmk div. proprietary. copyright ? 2014, japan aviation electronics industry, ltd. 10/10 unit: mm type without mating area taper (dx4r205jj9) *design is same as dx4r205jj8 except the mating area taper. product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2882 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change without notice. please contact jae for information. notice: 1. the values specified in this brochure are only for reference. the products and their specifications are subject to change wi thout notice. contact our sales staff for further information be fore considering or ordering any of our products. for purchase, a product specification must be agreed upon. 2. users are requested to provide protecti on circuits and redundancy circuits to ensure safety of the equipment, and sufficient ly review the suitability of jae's products to the equipment. 3. the products presented in this brochure are designed for the uses recommended below. we strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommend ed applications or for a specific use that requires an extremely high reliability. (1) applications that require consultation: (i) please contact us if you are considering use involving a qua lity assurance program that you specify or that is peculiar to the industry, such as: automotive electrical components, train cont rol, telecommunications devi ces (mainline), traffic light control, electric power, combustion control, fire prevention or security systems, disaster prevention equipment, etc. (ii) we may separately give you our s upport with a quality assurance program that you specify, when you think of a use such as : aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc. (2) recommended applications include: computers, office appliances, telecommunications devices (termina ls, mobile units), measuring e quipment, audiovisual equipment, home electric appliances, factory automation equipment, etc mating area reinforced type (micro-ab): dx4r205jj8
|
